System Specification

1. Communication Network Unit

     Features :

     a.  USB to Serial, USB to Serial 

          1). USB2.0 Full High Speed to UART High Speed bridge controller providing RS-232 designs to USB.

          2). Including 5V and 3.3V (500mA) DC/DC Power Circuits.

          3). Support PC Application Programs of USB Driver Libraries, Serial Communication Libraries.

          4). Simple baud Rate change for your Serial Hardware, RS232 transmit and receive.up to 921600 bits/sec.

          5). Supports Standard 0.1" pitch Connector, DB9 Connector, USB Normal Connectors. 

     b. CAN to Serial , Serial to CAN

     c. UART to UART with various baud rates

     d. LAN 10/100 Ethernet PHY  ( Next Version )

2. CMOS Image Interface unit

r

    Feature :

     a. 3M Pixels, 1/2", MTF(Modulation Transfer Function) 200 lp/mm

     b. High Resolution Support to QXGA(2048 x 1536, 12fp ), HDTV( 1920 x 1080 ), 18fp

     c. Power module intergrated, itself works with FPGA, and DSP chip

    d. 77mA System Power consumption

3. HDMI, DVI Display Interface Unit